--- In
korgpolyex@yahoogroups.com, "korgpolyex800"
<korgpolyex800@...> wrote:
>
> When you say "sequencer mode", do you mean the Poly always jumps
into
> playing the sequence or does it jump into sequencer edit mode?
>
> If you mean it is dropping into sequencer edit mode, then you must
> have the sequencer enable switch on the back set to enable (and most
> likely the sequencer play button is stuck down too). To prove this,
> set the sequencer switch on the back to disable. Then power off and
> back on the Poly. Then see if the sequencer starts playing the
> sequence or does it just behave normally but you are unable to play
a
> sequence?
>
> Mike.
>
Hi Mike!
Whn power ist switched on it seems to be in sequencer-edit-mode no
matter if the switch is enable or disable, program-number sais 1.8
but you can´t change it either. When VR1 is turned the display starts
to show weird things an the Poly makes weird noises until the display
tuns into "TAPE"-mode. No change can be made by pressing any buttons.
Moe