Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

----- Original Message -----

From: korgpolyex800

To: korgpolyex@yahoogroups.com

Sent: Monday, January 21, 2008 10:17 PM

Subject: [korgpolyex] gazillions of controller change messages

Dave,

you will be happy to know that the code I've written to handle the
joystick does NOT send gazillions of unwanted controller change messages.

Mike.

--- In korgpolyex@yahoogro ups.com, "David Mochen" <davidmochen@ ...> wrote:
>
> Just as we are in it... Mike, surely you must have heard that, even
in idle mode, the Poly 800 MK I will spit out lots of controller
messages (i think it was CC 1 or 2) with zero values that clog up the
MIDI stream real fast. That has always been a big drag.
> Maybe this could be of any help.
>
> cheers
>
> dave
>
> ----- Original Message -----
> From: jusufzemplin
> To: korgpolyex@yahoogro ups.com
> Sent: Monday, January 21, 2008 6:24 PM
> Subject: [korgpolyex] Re: Some questions about the sequencer and
MIDI Tx
>
>
> Hi,
>
> According Poly 800`s manual (page 108) and my experiences :
> Poly-800 can transmit and recieve the following kinds of data over
> the MIDI bus :
> ...
> 3. Sequencer clock and Start/Stop control signals
> ...
>
> I have controlled drum machine from Poly`s sequencer. Alesis Hr-16
> reacted to pressing Start/Stop, and to tempo change as well.
> I havent tried to check MIDI OUT with Ext MIDI clock. But I think in
> this case OUT is without MIDI clock data.
>
> I am going to re-connect and try out... lets wait...
>
> Jozef
>