Dave,
you will be happy to know that the code I've written to handle the
joystick does NOT send gazillions of unwanted controller change messages.
Mike.
--- In korgpolyex@yahoogroups.com, "David Mochen" <davidmochen@...> wrote:
>
> Just as we are in it... Mike, surely you must have heard that, even
in idle mode, the Poly 800 MK I will spit out lots of controller
messages (i think it was CC 1 or 2) with zero values that clog up the
MIDI stream real fast. That has always been a big drag.
> Maybe this could be of any help.
>
> cheers
>
> dave
>
> ----- Original Message -----
> From: jusufzemplin
> To: korgpolyex@yahoogroups.com
> Sent: Monday, January 21, 2008 6:24 PM
> Subject: [korgpolyex] Re: Some questions about the sequencer and
MIDI Tx
>
>
> Hi,
>
> According Poly 800`s manual (page 108) and my experiences :
> Poly-800 can transmit and recieve the following kinds of data over
> the MIDI bus :
> ...
> 3. Sequencer clock and Start/Stop control signals
> ...
>
> I have controlled drum machine from Poly`s sequencer. Alesis Hr-16
> reacted to pressing Start/Stop, and to tempo change as well.
> I havent tried to check MIDI OUT with Ext MIDI clock. But I think in
> this case OUT is without MIDI clock data.
>
> I am going to re-connect and try out... lets wait...
>
> Jozef
>