Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] Re: Some questions about the sequencer and MIDI Tx

From: "David Mochen" <davidmochen@...>
Date: 2008-01-22

Just as we are in it... Mike, surely you must have heard that, even in idle mode, the Poly 800 MK I will spit out lots of controller messages (i think it was CC 1 or 2) with zero values that clog up the MIDI stream real fast. That has always been a big drag.
Maybe this could be of any help.
 
cheers
 
dave
 
----- Original Message -----
From: jusufzemplin
To: korgpolyex@yahoogroups.com
Sent: Monday, January 21, 2008 6:24 PM
Subject: [korgpolyex] Re: Some questions about the sequencer and MIDI Tx

Hi,

According Poly 800`s manual (page 108) and my experiences :
Poly-800 can transmit and recieve the following kinds of data over
the MIDI bus :
...
3. Sequencer clock and Start/Stop control signals
...

I have controlled drum machine from Poly`s sequencer. Alesis Hr-16
reacted to pressing Start/Stop, and to tempo change as well.
I havent tried to check MIDI OUT with Ext MIDI clock. But I think in
this case OUT is without MIDI clock data.

I am going to re-connect and try out... lets wait...

Jozef