Hi,
if you have a mkII then you should only need a ∗.syx file.
If not, you have to try all of the wave-files, as long as you find one
that's working.
I attached one that worked for my setup (interface via PC-soundcard).
I'm sure it's the same sound patch as stored in the files section, but I had
my problems with those stored files.
But be patient! It may take some trials with different volume settings until
you get a red "Good".
Olaf
----- Original Message -----
From: "astakoume" <astakoume@...>
To: <korgpolyex@yahoogroups.com>
Sent: Monday, February 04, 2002 11:30 PM
Subject: [korgpolyex] Re: All data are lost!!
>
> Thank you Olaf!!
>
> This must be the cause.
>
> I do use a software sequencer (logic audio).
> Can you,or anybody write me wich one of all these files i have to
> download?
>
> Thanks again for your reply ,and yes,i've lost a lot of self created
> files but could be worst..!
>
>
> --- In korgpolyex@y..., "OlGu" <olgu@n...> wrote:
> > Hi,
> >
> > I think that happens to most of us poly800 users at least one time.
> Me too,
> > but I still love this machine....
> >
> > There's a known problem when the 800 is connected via midi to a
> sequencer
> > software or something like that.
> > Scott wrote some weeks ago that it may be helpful if you filter
> midi events
> > (remove all data that couldn't be used, just leave note, vel,
> modulation,
> > and so on.)
> >
> > If your data was lost without using midi I don't know about the
> root cause.
> >
> > Anyway, you have to install your factory sounds again via data
> interface,
> > you'll find the files in this forum.
> >
> > I hope you didn't loose a lot of self created sounds....
> >
> > Many greetings,
> >
> > Olaf
> >
> >
> > ----- Original Message -----
> > From: "astakoume" <astakoume@h...>
> > To: <korgpolyex@y...>
> > Sent: Sunday, February 03, 2002 10:59 PM
> > Subject: [korgpolyex] All data are lost!!
> >
> >
> > > Hi to everybody
> > > I am a poly-800 user and sudenly i have no data on it.I was
> editing
> > > my sounds and i did something wrong!!!Can anybody help??!!
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > korgpolyex-unsubscribe@y...
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
>
>
>
> To unsubscribe from this group, send an email to:
> korgpolyex-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>