On Tue, 9 Oct 2007, korgpolyex800 wrote:
> It will require removing the ROM socket (IC22) and chip select chip
> (IC29). Both need to be replaced with normal profile IC sockets
> (supplied in the kit). But the removal of the EPROM socket and the chip
> select chips can be tricky to do.
============ ========= ====
after removal, will those parts be needed? or will they be superseded by
new parts that will come with the kit?
after many years of electronic work, i can say that removing soldered DIP
chips without damaging the chips or the board SUCKS. of course, they're
easy to remove if they can be destroyed in the process... just cut all of
the legs off with a small electronic snips and then remove the legs from
the board, one at a time.
--
...atom
____________ _________ ___
http://atom. smasher.org/ 762A 3B98 A3C3 96C9 C6B7 582A B88D 52E4 D9F5 7808
------------ --------- --------- --------- --------- -
"America may be the best country in the world, but that's
kind of like being the valedictorian of summer school."
-- Dennis Miller