Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] Re: Mod questions

From: "David Mochen" <davidmochen@...>
Date: 2007-03-28

Hi Satnom. As for the audio input, Marco's explanation will do. I havent got here the exact link i follwoed (it was one old post in this same NG). When I get home ill email it to you.
 
However, as regards 12/24, please check one of my latest posts, since the post linked in Marco's page has a mistake that will render the synth virtually mute AFAIK....
 
YOu'll find a diagram for 12/24 in my post. REal easy.
 
G'luck,
 
DAve
----- Original Message -----
From: satnom2000
To: korgpolyex@yahoogroups.com
Sent: Wednesday, March 28, 2007 12:24 PM
Subject: [korgpolyex] Re: Mod questions

--- In korgpolyex@yahoogro ups.com, "marco_andreetta"
<marco_andreetta@ ...> wrote:
>
> you can find the explanation here:
> http://cometalabs. blogspot. com/
>
> Audio Input:
> Drill a hole and add a "normally closed" jack. This will be your audio
> in jack. Desolder the + lead of cap C24 from the circuit board. Add a
> wire from the desoldered lead to the tip of the jack. Then, solder a
> wire from the empty hole where the cap used to be, to the normally
> closed lug of the jack. The final step is to solder a wire from the
> ground lug to a suitable ground spot on the pcb. Done!

Thank you very much Marco. Did you do this mod? Is it worth the
effort? Can you use all the paramaters to modulate or to shape the
sound that you input in the Poly?

Bernard