--- In
korgpolyex@yahoogroups.com, "marco_andreetta"
<marco_andreetta@...> wrote:
>
> you can find the explanation here:
> http://cometalabs.blogspot.com/
>
> Audio Input:
> Drill a hole and add a "normally closed" jack. This will be your audio
> in jack. Desolder the + lead of cap C24 from the circuit board. Add a
> wire from the desoldered lead to the tip of the jack. Then, solder a
> wire from the empty hole where the cap used to be, to the normally
> closed lug of the jack. The final step is to solder a wire from the
> ground lug to a suitable ground spot on the pcb. Done!
Thank you very much Marco. Did you do this mod? Is it worth the
effort? Can you use all the paramaters to modulate or to shape the
sound that you input in the Poly?
Bernard