yeah i did it yesterday and it's fine. the only thing i'll change is
to replace the resonance pot with a linear one. the lower half of
resonance range has practically zero effect and at ~3 o'clock it jumps
straight into self-oscillation.
anyone using a linear pot for resonance?
i also did the filter 2/4pole switch and i LOVE the 12db/oct response!
i like it TONS better than the original 24db/oct! i really recommend
that to everyone.
then i was trying to make DCO->VCF modulation but i found out that the
DCO outputs are offset by +5VDC or so... i kinda figured that out
without an oscilloscope - just with a multimeter and
wires->mixer->soundcard and trial and error. is that true? what's the
easiest way to drop that signal down 5VDC? i think it can make quite a
nice mod.
other things i'm looking at is modding the chorus LFO to make it
variable rate. marjan urekar wrote he did that. any ideas?
cheers,
jure
On 4/5/06, Atom Smasher <atom@...> wrote:
>
> On Wed, 5 Apr 2006, jure zitnik wrote:
>
> > hello, i'd just like to ask how much difference would it make if i used
> > 47k pots instead of 50k ones? 50k pots are quite difficult to get here.
> > maybe if i wire a resistor in serial?
> ===============
>
> 47K pots should be fine.
>
>
> --
> ...atom
>
> ________________________
> http://atom.smasher.org/
> 762A 3B98 A3C3 96C9 C6B7 582A B88D 52E4 D9F5 7808
> -------------------------------------------------
>
> "To announce that there must be no criticism of the
> president, or that we are to stand by the president,
> right or wrong, is not only unpatriotic and servile,
> but morally treasonable to the American public."
> -- Theodore Roosevelt
>
>
>
>
> ________________________________
> YAHOO! GROUPS LINKS
>
>
> Visit your group "korgpolyex" on the web.
>
> To unsubscribe from this group, send an email to:
> korgpolyex-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
> ________________________________
>