Well it always nice to reply your own mail:
> Cutoff is bit different. I suspect it's OTA input as it's fed by again
> current from +V, lower leg with res and cap is for stabilisation.
> Atom's mod substitutes it for voltage divider and feeds current input
> with voltage. In theory that would be a problem. Can't say more. I'd
> toss in resistor inbetween pot wiper and chip input, 1k or so.
> Haven't tried it. Now, if you look at the borad you'll see silkscreened
> short link for bypassing trimpot to +V. Hmm, so maybe it really works.
> You might even not need 470ohm res he suggested.
I got it right except that additional resistor is already there
(22k) so Atom's mod is quite right. It'll work no problemo.
That 470-510 ohm res is there to put cutoff in useable range.
So this looks just OK...
Have fun...
--
marjan
me : Marjan Urekar
e-mail:
urekar.m@...s-diy :
http://surf.to/marjansystemsmusic :
http://go.to/forcemajeure