I have a Juno 106 too... mine is having that problem with poliphony
too... I've mailed a guy in australia that still have those chips,
but they're very expensive, at least for me here in Brazil... I've
found another guy who made a pcb board to replace the chip, but don't
know if it would not alter the sound...But i think it might be
helpfull, since you're into circuits stuff...
http://users.skynet.be/bk318113/303/juno.html --- In
korgpolyex@yahoogroups.com, "Alexander" <arf_hotdogdeity@y...>
wrote:
>
> I think the voice chips on the Juno 6/60 were the same, but the 106
> had different chips. maybe thats why the 106's die so often
>
> --- In korgpolyex@yahoogroups.com, x x <alienxxx2002@y...> wrote:
> > Do you want owners manual for poly 800 mk 2 or schematics?
> > I have schematics the whole set for poly 800 ver 1 and 2 the
polyex
> sight is missing stuff from vers one i need to post....I forgot i
had
> mk2 in my collection.I am currently looking for juno 60
schematics....
> Anyone happen to know where any are no big deal will locate soon
just
> picked up mint condition one for 200 bucks works good now but i want
> to compare the parts to muy juno 106 and hoope that the pair will
help
> keep one alive for at least the next 20 years......
> > Peace
> > Alienxxx
> > Also remeber these arent analog circuits these are chips that fry
> easy with mods so while possible with curtis chips etc in design
> toshiba chips etc old jap digi ics are not as flexible to inputs as
> they are outputs...
> >
> >
> > khate <khatedotorg@h...> wrote:
> > D'oh! I ran to my Poly after reading your post ("it's that
easy?!"),
> > and Korg couldn't have made that more obvious... I'm so used to
not
> > even looking at the printed parameters since I've had her long
enough
> > that I can program sounds without having to reference it. Don't I
> > feel silly... but many thanks for the tip!
> >
> > I don't know if you're already on it, but there's a very useful
Yahoo
> > group for circuit-bending folks, called "benders". Very helpful
> > people, and the files are a godsend. I was into bending before I
> > discovered the moogslayer, but I'm in the same boat as you: I've
> > bent/modded a dozen things now, but I'm still afraid of bungling
up
> > my high-in-sentimental-value Poly.
> >
> > Thanks again for your help, and I'll certainly pass on the manual
if
> > I find it. And yes, that delay IS mighty weird; it's probably the
#1
> > reason I'd like the manual as well...
> >
> > ~Khate
> > www.khate.org
> >
> > --- In korgpolyex@yahoogroups.com, "jisatsuboy"
<pederseneric@h...>
> > wrote:
> > >
> > > sorry. parameter 85.
> > >
> > > --- In korgpolyex@yahoogroups.com, "jisatsuboy"
<pederseneric@h...>
> > > wrote:
> > > > parameter #82 will switch the sequencer between one-time mode
and
> > > > repeat-mode. so if the value is 2, then it'll loop forever.
> > > >
> > > > i got into circuit bending after getting my Poly. I'm trying
to
> > > > build up the skill and confidence to do the moogslayer mod
> > without
> > > > fucking up my keyboard.
> > > >
> > > > let me know if you find an MKII manual online. I can't find
it
> > > > either. I'm interested in what it has to say about the
delay. I
> > > > think the delay is weird, and I don't know why.
> > > >
> > > > eric
> > > >
> > > >
> > > > --- In korgpolyex@yahoogroups.com, "khate" <khatedotorg@h...>
> > wrote:
> > > > > I'm hoping someone with a Mk-II specific manual (or more
> > > experience
> > > > > than I've got) can help...
> > > > >
> > > > > According to the Mk-I manual I downloaded from the files
> > section,
> > > > the
> > > > > sequencer will loop back to the beginning when it reaches
the
> > > last
> > > > > note or rest entered. On my Mk-II, that's not the case;
when it
> > > > gets
> > > > > to the last note, it just stops. Is that a difference
between
> > the
> > > > > two, or is my Poly just being weird? Is there a way to make
it
> > > > loop,
> > > > > some combination of buttons I'm missing? I swear I remember
> > > seeing
> > > > > something online about "loop enable" for the Poly800, but I
> > could
> > > > be
> > > > > just going nuts from lead inhalation while circuit-bending.
> > > > >
> > > > > Finally, if someone could just point me in the direction of
a
> > Mk-
> > > II
> > > > > manual online (for free; Googling it brings up plenty for
> > sale),
> > > > > that'd be fantastic.
> > > > >
> > > > > Thanks in advance for any help,
> > > > > Khate
> > > > > www.khate.org
> >
> >
> > Yahoo! Groups SponsorADVERTISEMENT
> >
> >
> > ---------------------------------
> > Yahoo! Groups Links
> >
> > To visit your group on the web, go to:
> > http://groups.yahoo.com/group/korgpolyex/
> >
> > To unsubscribe from this group, send an email to:
> > korgpolyex-unsubscribe@yahoogroups.com
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
> >
> >
> >
> > ---------------------------------
> > Do you Yahoo!?
> > Yahoo! Mail is new and improved - Check it out!