D'oh! I ran to my Poly after reading your post ("it's that easy?!"),
and Korg couldn't have made that more obvious... I'm so used to not
even looking at the printed parameters since I've had her long enough
that I can program sounds without having to reference it. Don't I
feel silly... but many thanks for the tip!
I don't know if you're already on it, but there's a very useful Yahoo
group for circuit-bending folks, called "benders". Very helpful
people, and the files are a godsend. I was into bending before I
discovered the moogslayer, but I'm in the same boat as you: I've
bent/modded a dozen things now, but I'm still afraid of bungling up
my high-in-sentimental-value Poly.
Thanks again for your help, and I'll certainly pass on the manual if
I find it. And yes, that delay IS mighty weird; it's probably the #1
reason I'd like the manual as well...
~Khate
www.khate.org
--- In
korgpolyex@yahoogroups.com, "jisatsuboy" <pederseneric@h...>
wrote:
>
> sorry. parameter 85.
>
> --- In korgpolyex@yahoogroups.com, "jisatsuboy" <pederseneric@h...>
> wrote:
> > parameter #82 will switch the sequencer between one-time mode and
> > repeat-mode. so if the value is 2, then it'll loop forever.
> >
> > i got into circuit bending after getting my Poly. I'm trying to
> > build up the skill and confidence to do the moogslayer mod
without
> > fucking up my keyboard.
> >
> > let me know if you find an MKII manual online. I can't find it
> > either. I'm interested in what it has to say about the delay. I
> > think the delay is weird, and I don't know why.
> >
> > eric
> >
> >
> > --- In korgpolyex@yahoogroups.com, "khate" <khatedotorg@h...>
wrote:
> > > I'm hoping someone with a Mk-II specific manual (or more
> experience
> > > than I've got) can help...
> > >
> > > According to the Mk-I manual I downloaded from the files
section,
> > the
> > > sequencer will loop back to the beginning when it reaches the
> last
> > > note or rest entered. On my Mk-II, that's not the case; when it
> > gets
> > > to the last note, it just stops. Is that a difference between
the
> > > two, or is my Poly just being weird? Is there a way to make it
> > loop,
> > > some combination of buttons I'm missing? I swear I remember
> seeing
> > > something online about "loop enable" for the Poly800, but I
could
> > be
> > > just going nuts from lead inhalation while circuit-bending.
> > >
> > > Finally, if someone could just point me in the direction of a
Mk-
> II
> > > manual online (for free; Googling it brings up plenty for
sale),
> > > that'd be fantastic.
> > >
> > > Thanks in advance for any help,
> > > Khate
> > > www.khate.org