Archive of the former Yahoo!Groups mailing list: Korg Mono/Poly

 

Oops!  Meant to send this to to list as well so that Valerio can get this info...

Thanks Natalia, I'll try there.

Valerio
 

-- Natalia

----- Forwarded Message -----
From: Natalia Rakowski <goosefan@yahoo.com>
To: Florian Anwander <fanwander@mnet-online.de>
Sent: Thursday, May 17, 2012 4:48 PM
Subject: Re: [korg_mono-poly] Expert Sleepers Silent Way and Mono/Poly

Well, that's helpful to know!  :-)

I would suggest that Valerio check out the ES forum for more help.  The dev was very helpful in getting me up and running:

http://www.muffwiggler.com/forum/viewforum.php?f=35

-- Natalia

---

From: Florian Anwander <fanwander@mnet-online.de>
To: korg_mono-poly@yahoogroups.com
Cc: Natalia Rakowski <goosefan@yahoo.com>
Sent: Thursday, May 17, 2012 4:37 PM
Subject: Re: [korg_mono-poly] Expert Sleepers Silent Way and Mono/Poly

Hello Natalia,

Unlike the MS-10 the MonoPoly uses V/Oct and positive Gate.

I could imagine, that the gate voltage is too low.

@Valerio: What happens, if you do the followgin:
∗ Connect only the CV but don't plug the Gate cable into the Monopoly. ∗
Then press and hold a key on the keyboard.
∗ Then press play in Logic.
Does the pitch now follow the pitches of the sequence in Logic?

Florian

Natalia Rakowski wrote:
>
>
> Hi Valerio -
>
> I have it working in Ableton Live with an MS-10, so I know it definitely
> works with Korg gear that uses CV. Unfortunately, I just purchased my
> Mono/Poly and sent it off for my tech to check out so I have not tried
> it with the Mono/Poly yet.
>
> However, just a few ideas:
>
> With my MS-10 I had to invert the gate to have it trigger properly. On
> the Voice Controller plugin I have it set like this:
>
> Gate Open: 0
> Trig On: 1
> Vel Max: 1
> Gate Closed: 1
> Trig Off: 0
> Vel Min: -1
>
> What happens if you try calibrating using the "Calibrate Hz/V" button?
>
> -- Natalia
>

>    ------------------------------------------------------------------------

>    ∗From:∗ ugh_it <valerio.saggini@gmail.com>
>    ∗To:∗ korg_mono-poly@yahoogroups.com
>    ∗Sent:∗ Thursday, May 17, 2012 12:26 PM
>    ∗Subject:∗ [korg_mono-poly] Expert Sleepers Silent Way and Mono/Poly
>
>    Hello,
>
>    I'm Valerio, from Italy.
>
>    I've tried to set up the demo version of Silent Way SW Voice
>    Controller 1.6.0 in Logic 9.1.7 to control my M/P via a Motu 828mk3
>    Hybrid but it doesn't work.
>
>    Has anybody successfully tried this thing?
>
>    Here is what I've done (following instruction shwon in Expert
>    Sleepers YT video at
>    http://www.youtube.com/watch?feature=player_embedded&v=ZUke1CDYY8E:
>
>    ∗Physical Connections∗
>
>    - Motu Out 7 goes into MP CV In via the tip plug (ring floating) of
>    a Hosa TRS/2 x TS cable.
>    - Motu Out 8 goes into MP Trig In via the tip plug (ring floating)
>    of a Hosa TRS/2 x TS cable.
>    - MP Output goes into Motu In 5.
>
>    ∗Logic Setup∗
>
>    I created 2 tracks:
>
>    - 1 audio track fed by input 7 (that is Motu In 5)
>    - 1 SW Instrument track which takes as input Silent Way SW Voice
>    Controller and output to 7-8 channels.
>
>    Then I've sidechained input 7 to Silent Way.
>
>    In the mixer I've created 2 auxes Silent Way track which output to
>    5-6 channels (Aux 1) and 7-8 (Aux 2).
>
>    That's it.
>
>    In the meter of Silent Way channel I can see a continous signal in
>    channel 7 and when I hit a key in my master keyboard I see the
>    signal in channel 8 but nothing happens.
>
>    Any idea?
>
>    Thanks
>
>    Valerio
>
>
>
>
>