--- In
emlsynth@yahoogroups.com, "kyhotay" <brianfolkes@...> wrote:
>
> I am trying to interface my EML101 to an Encore Expressionist MIDI>CV
> converter and am having a heck of a time trying to get the synth to
> track somewhat chromatically. The patch panel doesn't have the
> sequencer input but does have the OCS1 Ext CV in. It seems that there
> are several interactive pots to set pitch but I have no idea how to
> make it work.
>
> Any suggestions?
>
> Brian Folkes
>
You can't get the whole instrument to follow any jack and knob combos and the external
CV seems to have been intended for modulation, and only one envelope will respond to
the Trig in.
What I figured out was I could tap into the keyboard jack by unscrewing the plug. That way
I could see which pin is what. I posted my findings on Analogue Heaven years ago though
I've heard from someone with a different keyboard connector. Anyway one of the pins is
like an offset for the duophony. You'd probably not want to mess with it until you master
getting CV/Gate to work. The other thing that really threw me for about an hour is that
when the EML receives a gate there is an internal buffer that samples and holds the CV
coming in when the gate goes on. So if you are tweaking the CV on the expressionist you
won't hear a change until you send a new gate. This might be the reason for the CV input
jack that seems meant only for modulation. You can't modulate your incoming CV (though
obviously there are many modulation opportunities within the EML.
Also, while it may be obvious for "old pros". I found the best way to get it to track is to
temporarily forget about pitch, just get one octave to respond to one octave even if the "C"
sounds as an "F" a quater tone sharp or something. Once you get your octaves to be
octaves then it's a piece of cake to just make the C to a C with tuning