Dear Mike,
Thanks for the uploads, I am sure the calibration procedure will be very
helpful to many of us! FYI, I have seen several EML101s in my time but I
dont recall any of them being below serial number 400. The letter you
posted shows a unit with a number lower than 300 but I wonder how many of
these actually exist. I believe EML used to skip numbers intentionally and
doubt they started at SN 1. Does anyone else here have a unit below SN 300?
I am also curious to know the range of serial numbers of the other EML
products as I suspect the same number skipping is true with other models.
Mini
>From: "mike_b_eml" <digiboy@...>
>Reply-To: emlsynth@yahoogroups.com
>To: emlsynth@yahoogroups.com
>Subject: [emlsynth] 4 new pdf files uploaded
>Date: Sat, 31 Aug 2002 17:30:13 -0000
>
>Hi all
>I just uploaded 4 pdf files.
>
>go to
>http://groups.yahoo.com/group/emlsynth/files/
>
>and click to open the "Literature and Schemos folder"
>
>The new files are:
>
>100/101 Cleaning
>A 2 page note from EML on basic keyboard maintenance
>
>101Calibration
>This has been requested a couple of times recently. It's a 13 page
>document from EML on "aligning" the 101. It applies to SN#'s after 300
>but may have some things that will apply to the lower number too.
>
>101Checkup
>copy of a 2 page letter written by an EML service tech to a client with
>some good info.
>
>301
>A brief description from EML of the model 301. This is the rarer
>version of the 300 with an X-Y joystick. There is a picture of one in
>the Oddities folder in the photos section.
>
>All 4 of these files are pdf's. For some reason they are not showing
>the usual Acrobat Icon right now. I checked them by downloading back to
>a PC and a Mac and they seem to be fine. If they don't open with your
>Acrobat, try typing the ".pdf" file extension on the end of the file
>name.
>
>Please let me know if there is any problem opening them.
>
>Enjoy,
>
>Mike B
>
>
_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx