Archive of the former Yahoo!Groups mailing list: Vintage Simmons Drums (UK) Users Group

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [Simmons Drums] Mk1 pad output levels

From: "windsurfinsusie" <gardens@...>
Date: 2009-10-26

I'll check tonight, but I think both Simmons pads were the same on the mid tom. My original conclusion was that the Simmons pads had a lower output than my DIY pads, and that the mid tom wasn't as sensitive as the other 2 toms. The mid tom did sound, but just not very loud.

I wondered if whatever pads were sold with the SDS1000 had a higher output. The danger of me buying a mk1 kit is that I'll still have a barely audible mid tom. Maybe I should hold on for later pads.

I wonder how old my pads are though. They have a (mono?) jack socket. I've seen pads with XLR outputs. Are the XLR pads early or late models?


--- In Simmons_Drums@yahoogroups.com, jesper <jesper@...> wrote:
>
> Have you tried switching pads around? It may sound obvious but isn't all
> clear in your post.
>
> I e, plug a working tom into the mid tom input of the brain. That should
> give you a hint of what's wrong.
>
> If that works, it's the pad. If it doesn't there is some issue with the
> brain.
>
>
> --
> electronically yours, jesper
>
> - -- --- ---- ----- ---- --- -- -
> www.electronic-obsession.se
> www.myspace.com/machinepop
>
>
>
> windsurfinsusie skrev:
> >
> >
> > Is there a noticeable difference in output levels of different versions
> > of hex pads?
> >
> > I have an SDS1000m which works great with some home made pads with piezo
> > pickups on a single stand practice kit, but because they are all
> > connected to the same stand I get crosstalk. I bought a couple of old
> > Simmons pads, in the hope the crosstalk might be less, but they have
> > trouble triggering the mid tom. My diy pad is fine on the mid tom.
> >
> > I'm considering buying a complete set of mk1 pads and stands, but is it
> > possible I might get the same mid tom issue? Was the SDS1000m designed
> > for later pads with possibly higher output levels?
> >
> > It's possible there's a fault with the SDS1000m but it seems fine when
> > used with my DIY pads.
> >
> > Also, do I need to worry about how hard the mk1s are? This is just going
> > to be for studio use, so it won't get a huge amount of bashing. I heard
> > that a lot of drummers got stress fractures from the old pads.
> >
> > Cheers
> > Susie
>