I don't have an SDS V, but the following information is in my SDS 7 manual:
Serial numbers 0 - 250 are wired:
Pin 1 and 2 Ground
Pin 3 Hot
Serial numbers 250 and onwards (this is a quote...who knows exactly how serial number 250 is wired :-)
Pin 1 and 3 Ground
Pin 2 Hot
So, my guess would be that the SDS V probably follows the same wiring configuration as the early SDS 7's.
Just my 2 cents.
Vince
----- Original Message -----
From: Jesper
To: Simmons_Drums@yahoogroups.com
Sent: Wednesday, May 22, 2002 5:55 AM
Subject: [Simmons Drums] separate outs
Hi dudes!
I'm rigging for separate outs on my SDS-V - there is some weird posting about this on synthsite, but can anyone here tell me which is which, i e 1-2-3, hot-cold-ground, tip-ring-sleeve etc.
Any help appreciated!
electronically yours, jesper
www.bolina.hsb.se/hsidor/jesper
- -- --- ---- ----- ---- --- -- -
electronic obsession mailorder
http://obsession.svart.nu
Yahoo! Groups Sponsor
ADVERTISEMENT
To unsubscribe from this group, send an email to:
Simmons_Drums-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]