I'm not talking making it commercial
just build for your own sake
and if you do that with say 10 persons, and everybody takes up tasks and
try to find the right parts for the best price, think it's not that expensive
Perhaps use the original sdx as a blueprint of how it should work and function
and use a PC/mac as interfacing and sampler
So interfacing to the PC/mac would be the issue and writing an app
I think it can work on an atari 1040st
costs 30 euro's and a lot of time too write the app
Sounds easy right??
Sorry but I can't write any computerprogram, I can solder and build so who
knows, someone have any ideas
Berk
>-- Oorspronkelijk bericht --
>To: <Simmons_Drums@yahoogroups.com>
>From: <jesper@...>
>Date: Sat, 16 Jun 2007 10:26:53 +0200
>Subject: Re: Re: [Simmons Drums] Re: SDS3/4 clone-Design rights?
>Reply-To: Simmons_Drums@yahoogroups.com
>
>
>OK, so any cloner needs the original floppy set then. I highly doubt the
>
>financial part of trying to copy and market. I heard somewhere that Roland
>
>had checked the cost of taking up the production of the Jupiter 8 again
but
>
>the result was absurd so they put the idea on the shelf... even the SDS_V
>is
>hard to get rightr these days with the SSM filter chips being that
>expensive.
>
>Cloning the 3/4 is however a much cheaper business with just standard cheapo
>
>parts inside...
>
>electronically yours, jesper
>- -- --- ---- ----- ---- --- -- -
>www.electronic-obsession.se
>
>Order your own copy of the Machinepop/Imiafan
>split-EP at www.electronic-obsession.se/label.asp
>
>"Varför har du så många pianon?" (Nora Persson, 9 år)
>
>----- Original Message -----
>From: "Berk Aarts" <B.E.R.K@...>
>To: <Simmons_Drums@yahoogroups.com>
>Sent: Saturday, June 16, 2007 9:22 AM
>Subject: Betr: Re: [Simmons Drums] Re: SDS3/4 clone-Design rights?
>
>
>Software is booting from flop
>it runs on a 68000 ( kinda atari I guess)
>that would be the easy part
>
>Berk
>
>
>>-- Oorspronkelijk bericht --
>>To: <Simmons_Drums@yahoogroups.com>
>>From: <jesper@...>
>>Date: Sat, 16 Jun 2007 08:19:06 +0200
>>Subject: Re: [Simmons Drums] Re: SDS3/4 clone-Design rights?
>>Reply-To: Simmons_Drums@yahoogroups.com
>>
>>
>>The software isn't just on proms then? If so you can "just" copy a set
and
>>
>>go from there...
>>
>>electronically yours, jesper
>>- -- --- ---- ----- ---- --- -- -
>>www.electronic-obsession.se
>>
>>Order your own copy of the Machinepop/Imiafan
>>split-EP at www.electronic-obsession.se/label.asp
>>
>>"Varför har du så många pianon?" (Nora Persson, 9 år)
>>
>>----- Original Message -----
>>From: "Dave B" <bongo2001@...>
>>To: <Simmons_Drums@yahoogroups.com>
>>Sent: Saturday, June 16, 2007 3:16 AM
>>Subject: [Simmons Drums] Re: SDS3/4 clone-Design rights?
>>
>>
>>> Someone may have the schematic, but the trick would be getting the
>>> software, wouldn't it?
>>>
>>> Was the SDX the one that used multi-zone FSR pads?
>>>
>>>> While we're on it
>>>> Why not clone the SDX??
>>>> There is someone here owning the scematics, right??
>>>> if some could do that, and add some xtra features( like more ram, bigger
>>>> harddisk, polyphonic outputs), count me in
>>>>
>>>> Berk
>>>
>>>
>>>
>>>
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>
>
>
>________________________________________________________________________________________
>12move ADSL: Voordelig, snel en onbeperkt internet.
>Meer informatie vind je op http://adsl.12move.nl
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
________________________________________________________________________________________
12move ADSL: Voordelig, snel en onbeperkt internet.
Meer informatie vind je op
http://adsl.12move.nl