to split the pads rear shell........
basically stick finger(s) into the hole where the mounting tube fit and push hard or very hard on the shell
it shopuld pop away as it it held to the playing surface moulds via plastic tangs
not done this for ages but memory tells me some seprarte easy and some need a bit of force
when painting if you do it yourself get hold of a book that that shows you how to do fibre glass car body repairs
basically you'll end up sanding with wet and dry plus perhaps soem filler primers before going to spray and laquer
dp
----- Original Message -----
From: diverdrew1
To: Simmons_Drums@yahoogroups.com
Sent: Friday, March 18, 2005 8:45 AM
Subject: Re: [Simmons Drums] Painting Simmons Pads ???
Hi Jesper & Dave, thanks for the info.
The reason I want to paint them is that they are badly scratched.
Also, they are not painted on the inside, they are moulded out of
black plastic.
I still haven't figured out how to separate the shell from the
head...any ideas (SDS1000 Pads).
Cheers,,,Drew
Yahoo! Groups Sponsor
ADVERTISEMENT
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/Simmons_Drums/
b.. To unsubscribe from this group, send an email to:
Simmons_Drums-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]