For the record, I have not used the kenton 2000 or the encore units,
so take my advice with a grain of salt, perhaps. I did use the pro
solo for awhile until I got the motm-650. At first, I did want
multiple oscillators tracking a single CV. These days, I tend to
patch my oscillators in multi-voice configurations more frequently.
So I guess it really depends on how you imagine yourself using your
modular. Using a separate mult is (arguably) a more flexible
arrangement, but it means you'll need more cables.
--- In ModularSynthPanels@yahoogroups.com, Sam Ecoff <secoff@...> wrote:
>
> Hi,
>
> I haven't looked at your panel, but I have some input on this which
> may prove useful to you. I am a Frac Rack/Modcan A format guy (which
> is why I stay quiet most of the time here). However, about two years
> ago I built a panel for my Pro-2000. I allotted only one output for
> each of the CV and Gate outputs. BIg Mistake. I ∗always∗ had to start
> every patch with a mult and extra cables. Last year when I designed
> the panel for my Encore Expressionist, I did the right thing and
> provided 4-way mults for myself on the first two gate and CV jacks.
> Consequently, I use the encore far more than my Kenton, even tho I
> know the Kenton menus far better. I can almost always accomplish the
> same patch with two less modules and four fewer cables.
>
> My $0.02,
>
> Sam E.
> _______________________________
> Sam Ecoff
> Tanner/Monagle
> 1120 N. Market St.
> Milwaukee, WI 53202
> (414) 727-8190
> www.samecoff.com
>
>
>
> On Nov 26, 2007, at 7:37 PM, ithaib wrote:
>
> > I did copy your format Richard!
> >
> > Thanks for your suggestions guys, I will change the engraving tool
> > and play around with
> > the location of the fonts.
> >
> > However, why do you suggest I make it into 1U? You feel it's better
> > to have this panel
> > dedicated to the pro2000 and have more Mults on another panel?
> >
> > I was thinking that in some cases having it all in one panel is
> > convenient... maybe I'll
> > reconsider...
> >
> > Ithai
>