I did copy your format Richard!
Thanks for your suggestions guys, I will change the engraving tool and play around with
the location of the fonts.
However, why do you suggest I make it into 1U? You feel it's better to have this panel
dedicated to the pro2000 and have more Mults on another panel?
I was thinking that in some cases having it all in one panel is convenient... maybe I'll
reconsider...
Ithai
--- In ModularSynthPanels@yahoogroups.com, Richard Brewster <pugix@...> wrote:
>
> Looks like you copied my format! It's a perfect match with my grid. If
> you want, you can put the labels underneath the jacks instead of above
> (0.4 inches below center). There's enough room at the bottom. You have
> 0.05 inches more space there than at the top. I also suggest using the
> 0.2mm engraving tool.
>
> -Richard
>
> ithaib wrote:
> > Hi all,
> >
> > I just designed a MOTM breakout panel for my Kenton Pro-2000.
> >
> > I uploaded the file to the file section. It's called:
> >
> > motm_kenton_pro2000.fpd
> >
> > It's the first time I'm using FPE. Before I go ahead and order it, can
> > someone take a look at it and see if I chose all the right things
> > (fonts, size, etc...). One thing I'm wondering is if the "CV1" in the
> > left corner won't be covered by the screw.
> >
> > I'd really appreciate any input...
> > Thanks in advance!
> >
> > Ithai B.
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>