Yep, but there's new features since then.
I've plopped a scale version of the updated panel in the files
section. This is Milton format, shrunk from MOTM dimensions and uses
the small knobs (like the Tellun shrink boards). It has all the
current features except the Aux outputs. We could probably squeeze
them in with a little re-arranging.
clickmrmike
--- In ModularSynthPanels@yahoogroups.com, "wjhall11" <wjhall@...> wrote:
>
> Hi Mike - All - I'm on the road right now but I can get to your
> (Mike's) Klee drawing Friday PM. I think Will had fiddled with it a
> bit trying to make a strictly standard MOTM style design. Bill
>
>
>
> --- In ModularSynthPanels@yahoogroups.com, "clickmrmike" <mrmike@>
> wrote:
> >
> > I did an initial design; very Milton-like, but boring. I did it a
> > couple months ago, so it does not include the latest options. But
> > given that those options add a pot, a switch, and a couple jacks to
> > something that has nearly 40 switches already, I see no reason not to
> > include them.
> >
> > Several Frac and non-standard designs exist, including on that uses
> > slide pots, which are kind of attractive. This is a module that I
> > wouldn't mind seeing depart from MOTM standards, but a standard panel
> > would be fine, too.
> >
> > I sent my panel to the 'ills awhile back, I'll review it again and
> > have them pop it up on their site. I'll put it in the files section
> > here, too.
> >
> > mrmike
> >
> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
wrote:
> > >
> > > So, let's talk about the Klee. What shall we include? Exclude?
> > > I haven't looked into it too much, but of course I'm willing to
do a
> > > panel.
> > >
> > > Cheers,
> > > Scott Deyo
> > > The Bridechamber
> > > contact@
> > > www.bridechamber.com
> > >
> > >
> > > On Oct 23, 2007, at 2:45 PM, loopcycle wrote:
> > >
> > > > getting a klee panel would be awesome, but i think there are a
> number
> > > > of ways
> > > > to configure it. ultimately, im going to need two klee panels,
> > and im
> > > > not
> > > > looking forward to FPE because of expense, and i dont like how
> their
> > > > panels
> > > > have some flex at larger sizes (am i the only one with this
> > > > problem?). anyway,
> > > > design discussion would be good, if scott were willing to
> > consider it.
> > > >
> > > > --- clickmrmike <mrmike@> wrote:
> > > >
> > > > > --- In ModularSynthPanels@yahoogroups.com, "gino wong"
> > > > <wonggster@>
> > > > > wrote:
> > > > > >
> > > > > > How about Yves fixed filter panel if you haven't done it.
> > > > > >
> > > > >
> > > > > I second the Yves FFB, as he's just done a PCB run. And how
> about a
> > > > > CGS-04? Everybody could use a basic mixer panel.
> > > > >
> > > > > Other stuff:
> > > > > 120R
> > > > > 320R
> > > > > Miniwave (CV version)
> > > > > Thomas Henry XR2206 VCO
> > > > > Thomas Henry QFG
> > > > > Wogglebug
> > > > > stuff from Thomas Henry's new book (Analog Synthesizer for
> the 21st
> > > > > Century - available from Magic Smoke)
> > > > >
> > > > > How about a monster Klee panel?
> > > > >
> > > > > Woo hoo! Your shop will sink from the weight of this metal....
> > > > >
> > > > > mrmike
> > > > >
> > > > >
> > > > >
> > > >
> > > > screw the RIAA. artists, take control.
> > > > share and remix music, legally, on your own terms.
> > > > http://ccmixter.org
> > > >
> > > > __________________________________________________
> > > > Do You Yahoo!?
> > > > Tired of spam? Yahoo! Mail has the best spam protection around
> > > > http://mail.yahoo.com
> > > >
> > > >
> > >
> >
>