Archive of the former Yahoo!Groups mailing list: Modular Synth Panels

...and im 95% happy with it (enough to upload a couple pictures to the
group). I took the FPE design here in the Files section, but had to
makea handful of changes since I built the cgs13 up from an Elby kit
using very large leds.

BTW, the sliding caliper measurement tool was possibly the best $6
I've spent. It gave me all the measurements I needed to modify the FP
design. From now on I will be ordering all my parts and measuring
them before I order a frontpanel.

I went with a 3mm thickness = perfect for motm. I also used the 0.2mm
engraving tool and the text looks perfect--see the photo. I will use
the 0.2mm from now on.