Archive of the former Yahoo!Groups mailing list: Modular Synth Panels

I just uploaded three CGS Files. I have created a sub folder in the
CGS section entitled CGS cstella to avoid confusion with scott and
jeff's files. These 3 are adaptations of the nice work that scott and
jeff have already done. Thanks for all the help and please let me
know if there are any errors.

1. CGS 5U Gate Seq (this design was already posted and discussed)

2. CGS 1U Burst generator

This is an adaptation of Jeff's design. Changes are:

a. 8mm pushbutton trigger
b. 3mm activity LED's to the left and right of 'Clock Speed' text.
Holes are 4.32mm for VCC 3mm LED Holders.
c. The number '5' was added to the 12 o'clock pot positions
d. Text to .2mm tool
e. Tick marks to 'use .4mm tool'
f. I'm too sexy Red Finish
g. 'Burst Generator CGS06' text realigned. I thought the rack screws
might obscure text.

3. CGS 2U Quad Analog Drum

This is an adaptation of Scott's design. Changes are:

a. Pot holes to 3/8"
b. Fixed some minor text/hole alignments
c. Changed legending around Trigger In's and Outputs.
d. Text to .2mm
e. Red Finish

These will be my portion of the upcoming order (one of each). Scott
please let me know how to proceed. All the best, Charles.