Archive of the former Yahoo!Groups mailing list: Modular Synth Panels

To satisfy my 1U cgs panel mania, I've uploaded 5 1U cgs designs to the
files section. Please read below for some pertinent details if you are
interested in using/modifying these. Also, please let me know if I've
made any errors.

(1) cgs.asr.fpd: Dual analog shift register. Scott has a very nice panel
design that has 2 jacks for each shift output, mine does not. Both are
almost exactly the same price, so Scott's has more 'bang for your buck.'

For most of the following, Scott has nice 2U panels with more features.
Check his out also. However, if you are into 1U panels, the following
have the essentials.


(2) cgs.gatedcomp.fpd: Has the basic in's and out's with 3mm led's (close
fit, but checking 5 times with Switchcraft 112A's, fit should be ok).
Note that this panel is a "9 row" socket panel compared to the standard
motm style 8 rows of sockets. The 9 row is based on the Oakley oms-410
panel design and the cgs wave multiplier designs of mine.

(3) cgs.masterdivider.rotary.fpd: Master divider with 1 through 6
outputs, 1 through 6 180 outputs and one rotary switch for 90 and 270
outputs. One 3mm led for each original and 180 output (on for original,
off for 180), except for output 1 since the motm rails are in back of ~1
and 1. Let me know if the rotary numbering makes sense. This is also
based on the 9 row style.

(4) cgs.synthaconvcf.fpd: Synthacon type filter with 2 cv inputs, one
attenuated the other not. For using these 2 cv inputs you need to add a
mixer (as verified by Ken).

(5) cgs.vcdivider.fpd: Dual vc divider. This is not analogous to any
motm style and the pot knobs and sockets will not line up with knobs
and sockets on motm style panels. Based on the recent pcb's that have
the stair up and down outputs.

Comments appreciated, Jeff