One reason I started this list is as a place to post designs for a
number of different pcb-makers or whatever. So feel free to put them
in the files section. I'll start putting some of mine there too, and
whoever else has designs is welcome. It doesn't strictly have to be
MOTM format either.
Also, that way we can also check each others' designs before
ordering. We should probably have folders to keep them organized, no?
If you update a design, please delete the old one so we don't have 30
super psycho designs or something like that :)
--- In motmpanels@y..., Jeffrey Pontius <jpont@s...> wrote:
> Well, I don't have a Schaeffer panel design for a Fairlight, but I
have
> several others in (basically) motm style for modules from CGS (Ken
> Stone), EFM, Oakley, and Blacet that some of you may be
interested. I
> also have some pot hole/scale macros that I use. These are based
on motm
> 110 & 120 pot scales (I don't need the 'finer' scales currently on
motm
> modules since I rarely save patch diagrams), although the lines and
> numbers are a bit larger than motm panels (since my eyes need a
little
> more help these days), and not exactly the same font. Different
macros
> have different scalings (example: 0 to 10 or -5 to 5), and have
different
> hole diameters for Omeg (for Oakley modules) pots or
Spectrol/Bournes
> pots.
>
> I'd post these to the files section, but would first like to see if
anyone
> is interested. If you decide you would like to use any of these
files,
> ∗please∗ check them for your specifications. For example, in one or
> two designs the jack holes are off by a few mm relative to the motm
> issue panels. I don't get very stressed about this, but some of you
> may. This is an ongoing learning process for me, so some designs are
> 'tighter' than others. The list (so far):
>
> Oakley:
> multiladder (2u)
> state-variable filter (2u)
> equinoxe (1u)
> oms- 410 (1u) (companion to the motm 410 filter - has the stereo
output
> jacks)
> lfolag (2u) (designed & in my order queue - 1 lag & 2 lfo's [ver.1
& 2])
> efglfolag (2u) (efg, lfo & lag - I've decided that I don't like this
> arrangement, so the manufactured panel is available)
>
> CGS: (Ken Stone's neat, unique modules):
> analogic processor with 4 jack mult (1u)
> burst generator (1u)
> wave multiplier (1u) (without the 'grinder' section)
> super psycho (1u) (design uses the Encore UEG format -they look cool
> side-by-side. Sorry, no led's.)
>
> Blacet:
> eg1 (2u)
>
> EFM:
> vcf6c (1u)
> vcf12a (1u)
>
> Rene Schmitz:
> vco 4069 (1u) (panel works, but I need to rework the module to get
it
> functional - this one tests the limits of my diy abilities)
>
>
> [as an aside, I also have a 5U, 19" panel design for mounting an
Oberheim
> SEM, 16 connecting jacks, power supply, power switch and power led]
>
> Jeff