Looks great. Do you have a part number for those MIDI jacks? I will
be needing some good quality MIDI jacks that I can attach to a Stooge
panel. Looks like you've found some.
At 12:35 AM +0000 2004/12/22, djbrow54 wrote:
>I just finished a panel for my PAiA MIDI2CV in an 1U MOTM format.
>
>I used Mountain thumbswitches for the MIDI channel and program
>select. I had to add a set of invertors and pullup resistors
>to use these switches. I used a blank spacer between the two
>thumbswitches for more space and of course it's backordered.
>The photo shows a bit of foam as an interim spacer.
>
>I added a 6 pin MTA connector for power and used the Stooge
>jack brackets to mount the pcb.
>
>Photos at:
>http://home.earthlink.net/~dabr/davebr/MOTM/DJB-017_MIDI2CV
>
>Schaeffer design file in the "DJB designs" folder.
>
>Dave