Archive of the former Yahoo!Groups mailing list: Modular Synth Panels

I finished drilling my panel and mounting all the boards. Only made
one wiring mistake that was easily fixed. I ended up mounting the
bottom row of CV leds straight off the board so it could be as low
as possible as I used fairly tall connectors on the CV board. I
soldered the top row in after the board was installed. My holes
for the 3 mm leds was slightly undersized but I had a round file
that made it the perfect size. They pressed in quite nicely.

I uploaded a photo in my 'DJB Panels" folder in the photos section.

Dave