Thanks for the replies. I am interested in round holes, rather than than oblong.
I went ahead and created a euro12hp.fpd file in the "Panel Proposals" folder that I think is correct. Would someone mind verifying that I've got the hole placement correct? If so, I'll go ahead and create a whole range of blank, mounting hole only Euro panels for people to use as templates.
Most likely, I'll order a few blank panels with these templates just to verify that they fit correctly.
--- In ModularSynthPanels@yahoogroups.com, "David" <dingebre@...> wrote:
>
>
> I've posted several euro version fpd files to the "files" section of the group. I followed the measurements set out on the www.doepfer.de website.
>
> Go tothe Doepfer site and pick your language, then select the "Products" button on the left. Under the Analog A-100 Modular System, you'll see a list of links. Click on the "Mechanical Details" link and scroll down. They have a great diagram on where the holes should go and panel widths.
>
> Email if you have a question. I've built three or four panels based on this and they fit perfectly.
>
> David
>