Archive of the former Yahoo!Groups mailing list: Modular Synth Panels

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [ModularSynthPanels] Ian Fritz The All-In Envelope Generator

From: "Miguel Mendoza" <miguel@...>
Date: 2009-11-24

Thanks Scott. The led is working. I though that it should work using the gate/trigger input but now I don't think so... It works only on mono input, right?
 
Regards.
 
Miguel.
 
 
 
 
----- Original Message -----
From: Scott Deyo
To: ModularSynthPanels@yahoogroups.com
Sent: Tuesday, November 24, 2009 5:38 AM
Subject: Re: [ModularSynthPanels] Ian Fritz The All-In Envelope Generator

 

And the Pulse section is working? I don't think it should if the LED doesn't...


The flat part should be towards the bottom of the board. The circle is flat on that side, but it's not so obvious.

Do you have any other LEDs around? I could send another.

Scott Deyo
The Bridechamber
Jealous Edison Record Kompany




On Nov 23, 2009, at 4:45 PM, CV-Gate wrote:

Hello list, 
I just built an Ian Fritz All-In Envelope Generator kit recently bought in the Bridechamber. It seems to be working OK but the led doesn't blink. 

There is no led polarity indication on the PCB but I tried both ways. I don't know if it needs any jumper.

As you can see my electronics knowledge is not very extensive :-)

Please, any of you could provide any help?

Thanks in advance.

Miguel.