i'll have a bridechamber panel...
>Well I will need one, put me down for it.
>
>Question :
>
>Should I finish the Bananalogue or sell it along and get a CGS board instead ?
>
>OR keep both.
>
>best
>
>gino
>
>
>
>--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>>
>> I am. I have the layout done and will upload it this weekend, I hope.
>> IIRC it has 10 jacks, 7 pots, 3 switches.
>>
>> Scott Deyo
>> contact@...
>> The Bridechamber
>> www.bridechamber.com
>> Jealous Edison Record Kompany
>> www.jealousedison.com
>>
>>
>>
>>
>> On Oct 3, 2009, at 8:33 AM, Richard Brewster wrote:
>>
>> > Is Bridechamber doing a MOTM panel for this?
>> >
>> > Richard Brewster
>> > http://pugix.com
>> >
>> > Ross Stapf wrote:
>> > >
>> > >
>> > > I've built one. I have another half finished. The only problem is
>> > > the led's.
>> > > http://www.electro-music.com/forum/topic-26503-25.html Look at this
>> > > thread, page 2 about half way down is when the MOTM version is
>> > > discussed. There is a part list for the euro version on page 1
>> > that I
>> > > used and it was right for the most part.
>> > >
>> > > It is well labeled and was pretty easy to build. Again see the
>> > > instructions Andrew F posted to fix this. Other folks mention a
>> > > problem with the euro boards. I did not have this issue. The only
>> > > problem I had was with the LED's and the fix Andrew F gave works
>> > just
>> > > fine.
>> > >
>> > > This was the first project I did without step by step
>> > instructions. I
>> > > had been doing diy for less than a year when I finished it. I used
>> > > Sduck's panel layout.
>> > >
>> > > Ross
>> > >
>> > >
>> >
>> >
>> >
>>
>
>
>
>
>------------------------------------
>
>Yahoo! Groups Links
>
>
>