Archive of the former Yahoo!Groups mailing list: Modular Synth Panels

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [ModularSynthPanels] Re: bananalogue vcs in motm format?

From: Scott Deyo <contact@...>
Date: 2009-10-03

I am. I have the layout done and will upload it this weekend, I hope. 
IIRC it has 10 jacks, 7 pots, 3 switches. 

Scott Deyo
The Bridechamber
Jealous Edison Record Kompany




On Oct 3, 2009, at 8:33 AM, Richard Brewster wrote:

Is Bridechamber doing a MOTM panel for this?

Richard Brewster
http://pugix. com

Ross Stapf wrote:
>
>
> I've built one. I have another half finished. The only problem is 
> the led's. 
> http://www.electro- music.com/ forum/topic- 26503-25. html Look at this 
> thread, page 2 about half way down is when the MOTM version is 
> discussed. There is a part list for the euro version on page 1 that I 
> used and it was right for the most part.
> 
> It is well labeled and was pretty easy to build. Again see the 
> instructions Andrew F posted to fix this. Other folks mention a 
> problem with the euro boards. I did not have this issue. The only 
> problem I had was with the LED's and the fix Andrew F gave works just 
> fine.
> 
> This was the first project I did without step by step instructions. I 
> had been doing diy for less than a year when I finished it. I used 
> Sduck's panel layout.
> 
> Ross
> 
>