Sounds about right, except I've only got 10 jacks, and a hole for the led. Which boards are you using - the cgs ones? I used ones I got from Seth, which I think were prototypes of the cgs ones - the led didn't work as labeled, and the bipolar out was an add-on optional part. There were holes for pcb mount pots - I don't know if the cgs boards have those.
--- In ModularSynthPanels@yahoogroups.com, "adaaxs" <wonggster@...> wrote:
>
>
> I have a Mac too, so before I go build a pc. Seth didn't point me to any doc on this board so I have been winging it. According to my best guess a panel should be cut for 4 pots, 1 dpdt toggle and 11 jacks and I wouldn't be surprised if I was wrong.
>
>
>
> >
> > thanks much.
> >
> > is the picture in the photos section accurate? i can't currently get
> > my Parallels installation to work, so i can't fire up FPE to check
> > layout etc.
> >
> > tx
> > j
> >
> >
> > >updated verson posted to files section in sduck panels
> > >
> > >--- In ModularSynthPanels@yahoogroups.com, "sduck409" <sduck409@> wrote:
> > >>
> > >> Look in the sduck folder in the files section. 2u, fully featured,
> > >>not trad but you can easily modify it. Before ordering it give me a
> > >>chance to make sure I upped the revised version - I messed up the
> > >>position of the jacks on my first design of this, and revised it,
> > >>but don't remember if I ever posted the revision. I'll check that
> > >>this evening. There may be pictures of this one also in the
> > >>pictures section.
> > >>
> > >> --- In ModularSynthPanels@yahoogroups.com, Jason Proctor <jason@> wrote:
> > >> >
> > >> > does anyone have a good FPD for a (2U, one presumes) MOTM format
> > >> > Bananalogue VCS?
> > >> >
> > >> > thanks much
> > >> >
> > >>
> > >
> > >
> > >
> > >
> > >------------------------------------
> > >
> > >Yahoo! Groups Links
> > >
> > >
> > >
> >
>