Frank, Paul -
I see your dilemma. Again, assuming the features per JH's "Option 3" (our panel designs are based on this feature set) the thing that actually determines the width of the panel is the size of the 16 other knobs.
If you go with the 1/2in knobs (TYCO PKG50B1/4) and the 4U module, you could reduce the space and perhaps make your counting dials look more proportional.
An idea - consider the size of the other knobs in the TS parts kit, and how many. That would indicate the feature set TS based his parts kit on and, therefore, the requirements of the panel.
Bill
--- In ModularSynthPanels@yahoogroups.com, "Frank Vanaman" <fvanaman@...> wrote:
>
> Hi all-
>
>
>
> That's the issue I'm thinking about as well. I bought the TS-parts kit too,
> and after looking at the very compact counting dial, it would actually seem
> somewhat odd to have them on a panel that's big enough to accommodate much
> larger counting dials.
>
>
>
> Also considering that the actual knob is notably smaller than the dial body,
> having it along-side other knobs that are just about as big as the whole
> counting dial body might seem a bit odd as well. Hmmm.
>
>
>
> Did somebody ask for another can of worms to be opened? :-)
>
>
>
> At any rate, I'm just following along at this point. Obviously I'm going to
> have to come up with a panel (actually two) from somewhere at some point.but
> still in the head-scratching phase. Actually I'm in that phase most of the
> time.
>
>
>
> Frank
>
>
>
> _____
>
> From: ModularSynthPanels@yahoogroups.com
> [mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of Paul Lord
> Sent: Monday, September 14, 2009 11:14 AM
> To: ModularSynthPanels@yahoogroups.com
> Subject: Re: [ModularSynthPanels] Re: Living VCO
>
>
>
>
>
> Thanks Bill. Tobias' verniers are much smaller than those so they ought to
> work fine. Whether they will LOOK ok from a spacing perspective remains to
> be seen :)
>
> Paul
>
> On Sun, Sep 13, 2009 at 10:01 PM, wjhall11 <wjhall@...
> <mailto:wjhall@...> com> wrote:
>
>
>
> Hi Paul - We're not discussing any specific counting dial.
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.409 / Virus Database: 270.13.88/2357 - Release Date: 09/14/09
> 05:51:00
>