OK - and now for a correction from Jurgen... RESON on the PCB is the resonator output level at the output jack. DRY is the level of dry input at the output jack. So together, they act like a two channel mixer. If both levels are down, there's nothing at the output jack.
I changed Will's drawing to reflect this change and also moved the FREQ knob down per Scott Juskiw's idea.
http://www.dragonflyalley.com/images/JHpolymoogResonator/JHPolymoogResV4vIIwidth1-92in.jpgDave Brown, you'll want to reflect the RESON/DRY out change in your 2U design too, right?
Bill
--- In ModularSynthPanels@yahoogroups.com, Scott Juskiw <scott@...> wrote:
>
> I say, from top to bottom:
>
> GAIN
> FREAK
> EMPH
>
> By keeping FREAK in the middle you avoid any other possible conflicts
> with rotary switches, which can also be larger than your average bear,
> but that probably only matters for the more cramped 2U layouts.
>
> On 10-Sep-09, at 12:37 PM, wjhall11 wrote:
>
> > eeek - OK - we move FREQ down - what makes sense to be on top - GAIN
> > or EMPHASIS?
> >
> >
> > --- In ModularSynthPanels@yahoogroups.com, Scott Juskiw <scott@>
> > wrote:
> >>
> >>> So in the case of a 3U large-knob version, I believe there's more
> >>> space at the top anyway, right?
> >>
> >> Even using the standard big knob MOTM grid, you can't fit a 24mm pot
> >> along the top. I tried that with my TLN-867 tuner/headphone thingy
> >> and
> >> had to swap the two pots at the last minute.
> >>
>