Mix is the summed output of the inputs. Out is the output of the resonator. I was thinking that Mix out might be handy if you wanted to cascade two resonators or run them in stereo.
On the other hand ... as people have noted, you add another attenuator and have three inputs. I put a picture of it on there as well.
Dave
--- In ModularSynthPanels@yahoogroups.com, Scott Juskiw <scott@...> wrote:
>
> I like it. I was hoping to build this into 2U.
>
> What's the difference between the MIX and OUT jacks? Is the MIX jack
> after the MIX pot and the OUT jack just the straight resonator output?
> If so, you could have 3 inputs by getting rid of the OUT jack. Bottom
> half of panel would be like this:
>
> IN1 pot, IN2 pot, IN3 pot
> RES pot, PASS MODE switch, MIX pot
> IN1 jack, IN2 jack, IN3 jack, MIX jack
>
> Just throwing out ideas.
>
> On 28-Aug-09, at 1:40 PM, djbrow54 wrote:
>
> > I used your layout design and did a 2U version with small knobs. I
> > added a second input and attenuators to make for a more
> > symmetrical layout.
> >
> > http://modularsynthesis.com/jhaible/resonator/polyres.htm
> >
> > Dave
> >
>