Archive of the former Yahoo!Groups mailing list: Modular Synth Panels

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: Synth Systems PB-912 Tie Lines Mystery Panel

From: "wjhall11" <wjhall@...>
Date: 2009-07-15

Hi Paul -

OK, we get it. In fact, we've been planning to interface my guitar rig with our modular at some point. So this panel would be a way of passing audio and CV to external gadgetry, eh? And perhaps the numbering implies that - the MOTM multiple is number 910, after all.

Now - We're guessing that Brit "loom" is akin to Yank "snake" - sound about right?

And now that we're thinking about it, back in 2007, Dave Wellington sent us a couple stooge brackets and I'll bet he included this panel in the package just for fun. Maybe that's how we came by it.

Well - maybe it's time to figure out if and how we'll use the thing and than drill out the jack holes.

We'll take pics.

Thanks much, Paul

Bill and Will




--- In ModularSynthPanels@yahoogroups.com, Paul Bower <paul@...> wrote:
>
> someone mention me....?
>
> i completely missed this thread - sadly i have little time for modular
> fun these days
>
> the PB912 - is indeed named by Larry using his system
>
> i needed a single custom panel, and the Stooges of course obliged,
> it's just a simple 1U panel, i wired 8 audio tie lines and 4 voltage
> tie lines
>
> the audio connects to an 8 way loom that goes off to my console/
> patchbay and CV goes to a 4 way loom that heads off (or used to head
> off) to a couple of effects units with CV inputs (Bel BD80, Eventide
> H949, Powertran delay etc)
>
> so it's just a means of getting signal from modular to console
>
> cheers
> paul
>
>
>
> On 14 Jul 2009, at 08:30, wjhall11 wrote:
>
> >
> >
> > On Larry's site, he seems to attribute the 912 Tie-lines module to
> > Paul Bower. Maybe we ask Paul? Anyone know his email address? Bill
> > and Will
> >
> > --- In ModularSynthPanels@yahoogroups.com, "adaaxs" <wonggster@>
> > wrote:
> > >
> > > I saw a big 1/4 modular system that had something very similar,.
> > It wasn't DIY though . Technosaurus Selector I think, all the
> > patching was below the knob field, nice form factor.
> > >
> > > I imagine that crosstalk would be the issue if building something
> > like this.
> > >
> > > -- In ModularSynthPanels@yahoogroups.com, "peng3002" <megaOhm1@>
> > wrote:
> > > >
> > > > I remember being very impressed with the Magic Bus when i first
> > saw it way back when I was still building in MOTM format. I am
> > probably wrong on some of the details but I remember it like this:
> > > >
> > > > A row of jacks in groups of four that ran the length of the
> > cabinet beneath each row of modules. I think it was not just a bus
> > between cabs but also a bus between rows. As the thinking goes -
> > with MOTM jacks-on-bottom-pots-on-top layouts you achieve less
> > patchcord jungle. That is until you add a second row. Then the
> > theory goes out the window. If you add a row of jacks that are bus
> > lines and mults under each row of modules you can actually achieve
> > clutter free patches that will not obscure any pots. His was the
> > only system I have ever seen that achieved this goal. Very clever.
> > > >
> > > > p.
> > > >
> > > >
> > > >
> > > > --- In ModularSynthPanels@yahoogroups.com, scott juskiw <scott@>
> > wrote:
> > > > >
> > > > > That makes sense. The top four jacks were probably meant to
> > send signals TO another cabinet. The bottom eight jacks were
> > probably meant to receive signals FROM another cabinet or two.
> > > > >
> > > > > ----- Original Message -----
> > > > > From: gjames@
> > > > > Date: Friday, July 10, 2009 1:42 pm
> > > > > Subject: Re: [ModularSynthPanels] Synth Systems PB-912 Tie
> > Lines Mystery Panel
> > > > >
> > > > > > IIRC that was the panel Larry designed to bus between
> > cabinets.
> > > > > > The "912" number alludes to the fact that it was designed to
> > sit
> > > > > > next to the "900" series power module panels.
> > > > > >
> > > > > > -Greg James
> > > > > > -----Original Message-----
> > > > > > From: scott juskiw [mailto:scott@]
> > > > > > Sent: Friday, July 10, 2009 02:03 PM
> > > > > > To: ModularSynthPanels@yahoogroups.com
> > > > > > Subject: Re: [ModularSynthPanels] Synth Systems PB-912 Tie
> > Lines
> > > > > > Mystery Panel
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> >
> >
>
> Paul Bower
> Un! Recordings
>
> www.unrecordings.co.uk
> www.youtube.com/user/unrecordings
> www.myspace.com/unrecordings
> www.last.fm/label/Un%21/
>