Pushbuttons are a big pain to me because of the variation. I'm thinking
.25" because the MOTM "standard" is a momentary toggle like the 'ills
are going to do, though many of us may use .5" pushbuttons. Then the
issue arises of the silkscreen label, which needs to be farther away
from the .25" hole than the other switches, which is fine if you're
using the .5", but a bit goofy if you're using a toggle. For the Tellun
gate I used .5", but on the JH Krautrock I think I did .25" with the
legend farther up than usual. It's a muddle.
Scott Deyo
The Bridechamber
contact@...http://www.bridechamber.comJealous Edison Record Kompany
http://www.jealousedison.com On Mar 18, 2009, at 6:28 PM, loopcycle wrote:
> Hi Dave,
>
> I'm glad you are double checking the design. I think Thomas placed
> the bus 1 load switch next to the main CV output on the right side
> (the momentary switches are the large holes).
>
> Thomas or Scott--what part number are the momentary switch holes
> designed for? I know we are getting about a 50/50% response on the
> "bore your own holes out" poll in the group here, but Bill/Will bring
> a good point because the size of those switch holes will force
> builders to choose certain hardware that may/may not be easily
> available.
>
> Hans
>
> --- In ModularSynthPanels@yahoogroups.com, "Dave" <lexvortex@...>
> wrote:
> >
> > Hi Scott,
> >
> > I noticed in Thomas's oval design he left out the gate bus 1 to
> load switch (a standard option in the design), will you be including
> this in your design, I hope so :)
> >
> > Thanks,
> > Dave
> >
> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> wrote:
> > >
> > > I'm thinking probably $100, around $180 _less_ than FPE!
> > >
> > > Scott Deyo
> > > The Bridechamber
> > > contact@
> > > http://www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com
> > >
> > >
> > > On Mar 18, 2009, at 12:38 PM, loss1234 wrote:
> > >
> > > > how much are the panels for the klee? definitely interested
> > > >
> > > > thanks
> > > > > >
> > > > > > Scott Deyo
> > > > > > The Bridechamber
> > > > > > contact@
> > > > > > http://www.bridechamber.com
> > > > > > Jealous Edison Record Kompany
> > > > > > http://www.jealousedison.com
> > > > > >
> > > > > >
> > > > > > On Mar 17, 2009, at 2:16 AM, krelnarb wrote:
> > > > > >
> > > > > > > Off topic, but if you need a show of hands for a panel
> count
> > > > I'll be
> > > > > > > getting a CVS panel also.
> > > > > > >
> > > > > > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo
> <contact@>
> > > > > > > wrote:
> > > > > > > >
> > > > > > > > So the Klee and MFOS seq's are finally nearing their
> day. My
> > > > > > > conundrum:
> > > > > > > > I don't want to order 50 expensive panels and sell 10.
> So...
> > > > > > > > How many folks are in for these sequencers?
> > > > > > > > They are Thomas White's great oval and circle designs.
> Thanks
> > > > > > > Thomas!
> > > > > > > >
> > > > > > > > Cheers,
> > > > > > > > Scott Deyo
> > > > > > > > The Bridechamber
> > > > > > > > contact@
> > > > > > > > http://www.bridechamber.com
> > > > > > > > Jealous Edison Record Kompany
> > > > > > > > http://www.jealousedison.com
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > >
> >
>
>