Archive of the former Yahoo!Groups mailing list: Modular Synth Panels

Ok, as requested I whipped these up this evening - took maybe 1/2 hour. These are based
on the panels I have that I got from Blacet directly, and the measurements are as close as I
could get so there shouldn't be any problems. I made 2 versions - one with 2 sets of 4x
multiple holes drilled at the bottom (8 holes, and 2 engraved boxes connecting them); and
the other without multiple holes, just the frac related holes. You can use the multiple holes
for other purposes too - I have my paia midi2cv8 in one of these, and have the 1/4in jacks
down on the bottom. The original blacet panels came with pilot holes predrilled. Cost - with
multiples, 34.50, without multiples, 29$ - not bad! I'll post pictures of these in a minute so
you can see what's going on without firing up fpd. Look in the sduck folders in both files and
pictures for these.

Still have the 2 original blacet versions of these - basically the same things, plastic wrapped,
with the mounting screws for both frac and motm, with the paint that matches genuine
synthtech motm stuff, undrilled pilot holes for the multiples, 20$ each, no shipping charge if
you don't mind a padded mailer.