Hi Scott
Maybe give Fastenal a call -- these weren't listed on their web page but it might be a special order option.
Good luck!
Dave
Thanks, Dave.
Yes, for some reason $.13 each is the best I can find @1000.
It's OEM Hardware or something like that.
So it goes : )
Cheers,
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com
On Jan 28, 2009, at 11:34 PM, Dave Halliday wrote:
I was going to ask if you tried Fastenal but they only have zinc finishes...
Grainger does have some nice cap-head screws but being Grainger, you are not looking at the "good price" aspect.
Fastenal generally charges a couple bucks for 100 small machine screws. Grainger is asking $14.37 for item 6CE31 which is 100 of the following description:
Socket Head Cap Screw, 12.9 Alloy Steel, Furnace Black Finish, Hex Socket, Thread Size M2X0.40mm, Drive Size 1.5mm, Decimal Equivalent 0.079 In, Thread Type Metric, Fully Threaded, Right Hand Thread Direction, Length Under Head 6mm, Head Height 2mm, Head Dia 3.8mm, Thread Class 5g6g, Rockwell Hardness C39-C44, Min Tensile Strength 176,900 PSI, Meets DIN 912/ISO 4762, Package 100
Good luck!
Dave
From: ModularSynthPanels@yahoogroups.com [mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of Scott Deyo
Sent: Wednesday, January 28, 2009 7:06 PM
To: ModularSynthPanels@yahoogroups.com
Subject: Re: [ModularSynthPanels] Re: DDVCO
Very soon... I'm out of screws for mounting the sliders.
Oddly, M2 5mm black screws are hard to find at a good price.
: (
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com
On Jan 28, 2009, at 4:31 PM, Dave wrote:
Hey Scott,
Have these started shipping yet?
Dave
--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> They are "in" : )
> I'm just waiting on the proper screws for mounting the slider board,
> and then testing and shipping... next week?????
>
> I'm very excited too -- a lot of work (especially for Ian!) and money
> to get this all happ'nin', but it will be well worth it.
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Jan 10, 2009, at 6:05 PM, James Elliott wrote:
>
> > Did I read the bridechamber news section correctly? The DDVCO panels
> > are in?
> >
> > YAY YAY YAY!!!!!
> >
> > I can hardly contain myself I am sooooooooooooooooo excited!
> >
> > -Jim
> >
> >
> >
>