Okay V1.1 prelim is up of the BOM- I just need some help on the proper
switches- the ∗good∗ bat handle ones- and verification of the 50K
Spectrol pot being the right one- and then it will be ready...
Thanks everyone so far!
--- In ModularSynthPanels@yahoogroups.com, "Steve" <steve@...> wrote:
>
> whew I knew something was wrong when I looked at...
> I'm still perfecting the art of going quickly through these catalogs-
> anyone have recommendations for part numbers for those best bat handle
> switches?
>
> Thanks in advance- when I get this BOM reliable I'll let everyone know
>
> --- In ModularSynthPanels@yahoogroups.com, "babysealclub"
> <babysealclub@> wrote:
> >
> > Correct me if I'm wrong, but is this the right Lumex LED? It looks
> > like the $9.00 price is for 10. I used the part number from the
> > posted BOM.
> >
> > Digi-Key Part Number 67-1157-ND Price Break Unit Price Extended Price
> > 1 1.13000 1.13
> > 10 0.90000 9.00
> > 50 0.78760 39.38
> > 250 0.67500 168.75
> > 1,000 0.58500 585.00
> >
> > Quantity Available 1,810
> > Manufacturer Lumex Opto/Components Inc
> > Manufacturer Part Number SSI-LXH387YD
> > Description LED 4.9MM FLAT TOP YEL PANEL MNT
> > Lead Free Status / RoHS Status Lead free / RoHS compliant
> > All prices are in US dollars.
> >
> > Todd
> >
> >
> >
> >
> > --- In ModularSynthPanels@yahoogroups.com, "Steve" <steve@> wrote:
> > >
> > > Forgive me if any of this is redundant or already answered.
> > >
> > > I'm looking to complete the front panel BOM for the Thomas White
> > > Rotary Klee MOTM panel soon in production by BrideChamber.
> > >
> > > After some quick emails with Thomas, I put together a PRELIMINARY
> > BOM.
> > >
> > > His rotary design and the BOM is in the KleeRotary folder I just
> > > created here in the Files area.
> > >
> > > There are a few parts that I need help on- namely some of the
> > toggles,
> > > and confirmation of whether the knobs should be the large MOTM size
> > or
> > > the small ones. They are highlighted in yellow.
> > >
> > > I'm also going to probably substitute the $9 Lumex panel LEDs with a
> > > $.09 LED panel mount and a T1 standard LED to save about $175 on the
> > > build. Suggestions for proper T1 LEDs are welcome.
> > >
> > > Thomas- if you see this and find any of this content objectionable
> > let
> > > me know and I'll remove it.
> > >
> > > Please let me know if you have any suggestions for the BOM so that I
> > > can complete it.
> > >
> > > Thanks in advance,
> > >
> > > Steve from Modularland.com
> > >
> >
>