Hi Steve,
No worries on the content. The knobs you'll need are
the larger MOTM knobs and smaller ones for the inner
circle and corner pots. The center knob is a size up
from the MOTM standard knob.
I didn't know the Lumex LED's now cost $9! They were
only 2 each for the extra bright ones when I got them
I think.
Parts can be expensive, but don't skimp on your step
switch quality. You want these to last a while.
They'll take the brunt of the abuse when playing with
the module.
Thomas
--- Steve <
steve@...> wrote:
> Forgive me if any of this is redundant or already
> answered.
>
> I'm looking to complete the front panel BOM for the
> Thomas White
> Rotary Klee MOTM panel soon in production by
> BrideChamber.
>
> After some quick emails with Thomas, I put together
> a PRELIMINARY BOM.
>
> His rotary design and the BOM is in the KleeRotary
> folder I just
> created here in the Files area.
>
> There are a few parts that I need help on- namely
> some of the toggles,
> and confirmation of whether the knobs should be the
> large MOTM size or
> the small ones. They are highlighted in yellow.
>
> I'm also going to probably substitute the $9 Lumex
> panel LEDs with a
> $.09 LED panel mount and a T1 standard LED to save
> about $175 on the
> build. Suggestions for proper T1 LEDs are welcome.
>
> Thomas- if you see this and find any of this content
> objectionable let
> me know and I'll remove it.
>
> Please let me know if you have any suggestions for
> the BOM so that I
> can complete it.
>
> Thanks in advance,
>
> Steve from Modularland.com
>
>
>
Thomas White
Natural Rhythm
www.naturalrhythmmusic.com