While it isn't the best (it's only about a 60% braid) and isn't the
smallest (RG-178 is smaller in diameter), I use RG-174. It's
also what MOTM uses. It is less than an 1/8" O.D. and quite flexible.
It's available in short lengths or by the foot from a number of
online vendors.
You don't need the best or the smallest for building modules because
there is more than enough room and the runs are very short.
On 10/27/08, wjhall11 put forth:
>Hi Gino -
>
>The shielded hook up we got some time back looks like it matches the
>stuff Paul uses exactly. the Mouser number on its spool is
>"566-8216-100" and is "Belden Co-Axial Cable." Sound good?
>
>--- In ModularSynthPanels@yahoogroups.com, "adaaxs" <wonggster@...> wrote:
> >
> > Question:
> >
> > What is the best and what is the smallest shielded hook up wire ?
> >
> > I am almost out and am wondering aloud if there is something smaller
> >
> > I have been using two types both unmarked both feel like Belden
>(stiff) 1/8", one a little less
> > so (smaller, waxy, stiff) 7/64". I don't remember the cat numbers
>a thousand feet back.