Hey guys,
Thanks for the info, I'll try printing a panel out (great idea!)
Dave
--- In
ModularSynthPanels@yahoogroups.com, "Andrew Listmayer"
<andrewlistmayer@...> wrote:
>
> You might want to print it out and place all your components on it
to make
> sure, though. It would be an expensive mistake if something didn't fit.
>
> On Fri, Oct 3, 2008 at 11:12 AM, Andrew Listmayer <andrewlistmayer@...
> > wrote:
>
> > It looks like the jack washers might partially cover the "2" and
"8" around
> > the pots. Other than that, if you are using 16mm(or less) pots and
1/2"
> > knobs it should be a tight squeeze but workable. Nice job.
> >
> >
> > On Fri, Oct 3, 2008 at 4:25 AM, Dave <lexvortex@...> wrote:
> >
> >> Hi,
> >>
> >> I just designed a 3U wide panel for the Buchla 281 quad function
> >> generator. This is pretty much my first panel that I've designed. I
> >> want to fit 4 of TOPPS from electro-music.com PCBs behind this panel
> >> using as little space as possible. I have uploaded the FPD file into
> >> the file section and would like some more experienced panel designers
> >> to look at it and let me know what they think, basically will
> >> everything actually fit onto the panel,will any of the writing be
> >> obscured by the jack washers etc...
> >>
> >> Thanks for any input or advice,
> >> Dave
> >>
> >>
> >>
> >
> >
>