Looks good. Just FYI, I may be doing an alternate board version that
gives a different distribution than the equal weighted 10K resistor
ladder. I'm thinking of a Guassian distribution where the outputs are
more closely spaced in the center then spread out with increasing
separation towards the ends.
John Loffink
jloffink@... The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com/The Wavemakers Modular and Integrated Synthesizer Web Site
http://www.wavemakers-synth.com/ >
> I've been working on a 2U panel for Ken Stone's cv cluster module, and
> have uploaded my current rendition to the motmpanels files, cgs
> subdirectory. Look for cgs.cluster2U.fpd (about 2/3 down the list).
I
> also have a 1U design (in case someone is interested), but I think the
2U
> design has much more functionality to it.
>
> The panel has all of the outputs. In addition, it has (1) an
additional
> base in with thru output, (2) an additional cv mod in with thru output
> [all 4 inputs have corresponding thru outputs], (3) attenuator
locations
> for all 4 inputs, and (5) an on/off switch location for even or odd
sets
> of outputs. I've switched to the .2mm text engraving, although the
> attenuator markings are still .4mm (doesn't seem to make any noticable
> difference in visualization or price from .2mm markings).
>
> As always I am interested in constructive feedback, especially if Ken
sees
> something that is amiss.
>
> Jeff
>
>