Scott,
While you are there, just our of curiosity what sort of durations are we talking about here for the ADR and Delay timing components?
-----Original Message-----
>From: Scott Deyo <contact@...>
>Sent: Sep 11, 2008 9:06 AM
>To: ModularSynthPanels@yahoogroups.com
>Subject: Re: [ModularSynthPanels] Re: Ian Fritz AD/ AR PCBs!
>
>It does, but it will continue "sustaining" (not releasing) as long as
>the gate is present. So if you want really snappy EGs and your gates
>are too long, you can condition them w/ the Pulse Delay section, Delay
>at 0, Width at 0 or close to it. If they are too short, put Delay at 0
>and Width at whatever you need.
>But the "gate conditioning" use isn't something I'd get hung up on.
>It's just an extra utility.
>Ian could always do a PCB w/ two EGs on it, but I'm not sure if he'd be
>interested. I'll run it by him, but there's a lot of other stuff going
>on right now, so I couldn't see that happening anytime soon.
>
>Scott Deyo
>The Bridechamber
>contact@...
>http://www.bridechamber.com
>Jealous Edison Record Kompany
>http://www.jealousedison.com
>
>
>On Sep 11, 2008, at 10:34 AM, andrewlistmayer wrote:
>
>> Thanks for the reply, but I still don' think I'm into the 21st century
>> yet. Doesn't the envelope trigger when the input rises over a certain
>> threshold, meaning anything can trigger it? If so, why does it matter
>> how short or long the trigger is?
>>
>> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...>
>> wrote:
>> >
>> > The monostable can do lots of things.
>> > It can make your gate into a trigger, or your trigger into a gate.
>> So,
>> > if your sequencer sends out short triggers, you can stretch it into
>> a
>> > longer gate for filter sweeps and such on slow sequences, and vice
>> > versa if your sequencer sends out gates which are a too long.
>> > It can make a short trigger into a long AR, and your long gate into
>> a
>> > percussive AD, so you can get a little staccato bow on a violin
>> sound
>> > or a tonguing to your clarinet sound, while the gate on the note
>> you're
>> > holding down is triggering another AR for your filter frequency.
>> > You can plug your trigger into both Mono and G/T inputs to get
>> double
>> > triggering.
>> > You can use it as a simple pulse delay, cascading into your next EG.
>> >
>> > If you're an ADSR kind of fella, then stick w/ those. I think a lot
>> of
>> > folks leave Sustain at 10, and could use an extra bit of
>> versatility in
>> > their 1U EG.
>> >
>> > Scott Deyo
>> > The Bridechamber
>> > contact@...
>> > http://www.bridechamber.com
>> > Jealous Edison Record Kompany
>> > http://www.jealousedison.com
>> >
>> >
>> > On Sep 10, 2008, at 11:47 PM, andrewlistmayer wrote:
>> >
>> > > Can someone enlighten me? What is the point of the pulse delay? I
>> > > would rather go for another AR envelope, as you could use that as
>> a
>> > > trigger delay for your first envelope or as a regular envelope
>> itself,
>> > > but I'm a noob so set me straight.
>> > >
>> > > --- In ModularSynthPanels@yahoogroups.com, waveguide@ wrote:
>> > > >
>> > > > Scott,
>> > > >
>> > > > Just read the posted docs for this module. Brilliant. I had been
>> > > hoping to come across something like this for a long time. The
>> > > multifunction utilitarian pulse delay is a superb bonus. I don't
>> > > design circuits but these building blocks are ideal and exactly
>> what I
>> > > would do if I could.
>> > > >
>> > > > Consider a bank of 5-6 of these, sequenced.
>> > > >
>> > > > My thanks to Ian and of course you for picking them up for
>> > > distribution here. Looks like things may be resolving themselves
>> here.
>> > > Hopefully I can follow through on my plan on picking up pairs of
>> all
>> > > the Fritz pcbs followed by and parts kits.
>> > > >
>> > > > P.S
>> > > > For the knobs buy I may be able to reach for 200.
>> > > >
>> > > > Regards
>> > > > C.Holsey
>> > > >
>> > > > -----Original Message-----
>> > > > >From: Scott Deyo <contact@>
>> > > > >Sent: Aug 15, 2008 12:00 PM
>> > > > >To: ModularSynthPanels@yahoogroups.com
>> > > > >Subject: [ModularSynthPanels] Ian Fritz AD/ AR PCBs!
>> > > > >
>> > > > >Just in --
>> > > > >Ian Fritz's EG!
>> > > > >
>> > > > >Controls: Attack, Decay/ Release, Pulse Delay, Pulse Width.
>> > > > >Jacks: Trig/Gate Input, AD/AR Output, Pulse Input, Pulse
>> Output.
>> > > > >LED.
>> > > > >
>> > > > >Available on the site, panels being worked on.
>> > > > >
>> > > > >Cheers,
>> > > > >Scott Deyo
>> > > > >The Bridechamber
>> > > > >contact@
>> > > > >http://www.bridechamber.com
>> > > > >Jealous Edison Record Kompany
>> > > > >http://www.jealousedison.com
>> > > > >
>> > > >
>> > >
>> > >
>> > >
>> >
>>
>>
>>