Archive of the former Yahoo!Groups mailing list: Modular Synth Panels

previous by date index next by date
previous in topic topic list  

Subject: Re: Re: Any CGS bracket interest

From: sasami@...
Date: 2003-04-22

From: Larry Hendry <hendrysr@...>

>2. I can put PCB mounting holes (see Ken's note below) to accomodate
>1, 2 and 3" wide PCBs, assuming the hole placement from the edges is
>consistent. Those mounting some of the older PCBs would have to
>drill their own holes if they did choose to use these brackets.

The holes are 0.15" in from the edges (top, bottom and sides) of the board
in all of the standardised board sizes. The holes themselves are 3mm. The
wave multiplier is consistent with this spacing.

Ken

_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>