A panel is in the works, but not yet made.
If you scroll down on this page, you can see a couple ideas from us:
http://www.dragonflyalley.com/billAndWillMOTMSynth.htmOn the above page, the left thumbnail represents a panel for the
Krautrock as Jurgen designed the circuit. Jurgen helped by reviewing
this design and we've incorporated his suggetions.
The right thumbnail is a fantasy at this point - it's an "if only we
could add a daughterboard so CVs could be used" version. And my son,
Will, put the little skull and crossbones on there <G>.
As designed, there are no CV inputs to the unit. The three jacks
BYPASS, RATE, and DEPTH are for switch and expression pedals. I
believe I recall that Jurgen warned us that applying a CV here could
be damaging to the unit - hence our little warning on the panel.
There's a momentary switch for the effect bypass. If you were making
this into a stomp-box these things would be particularly handy.
I think the reason progress on this stalled a bit is that some of the
parts have been hard to get west of the Atlantic. And one of those
parts is the E10 panel-mount socket with the groovy, retro lens. I
found these parts at various over-seas suppliers and there was talk of
a group-buy. But Jurgen recently partnered with a fellow who, I
think, can help us get the parts - but I haven't had time lately to
explore further.
Anyway, I'll turn my attention back to this. Hopefully Scott can get
it in on one of his next runs.
Bill
--- In
ModularSynthPanels@yahoogroups.com, Nathan Wooster
<woostern@...> wrote:
>
> Has anybody made a MOTM panel for the Compact Clone? Will
Bridechamber do this?
>
> thanks,
> Nathan
>