It's true that you don't need buffers for this, but in our
consideration about doing the separate outputs, we decided that,
because our primary application will be in recording, the difference
in phase between the separate and other outputs could possibly create
audible - well - oddities however subtle. So to be safe, we're
putting buffer/inverters on all separate outputs.
In our case, the whole idea of separate outputs I blame on
now-soon-to-be-17-year-old Will anyway. I could think of no real
application for it - but I acquiesced (an expensive indulgence,
perhaps). But now I can think of a reason to do it. And I'm glad our
building process has been so delayed on this, because realizing this
possible application has brought up a construction issue.
But as this over-laps with Scott Juskiw's JH String filter thread, I'm
going to take the subject up there, OK?
Bill (and Will)
--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> Looking at the schems, I actually don't believe buffers are needed.
> Just use a 1K from the output of each band to a jack. You can get that
> output from the left lug of each pot (as seen from back, with lugs
> hanging down). They will be inverted, though.
>
> If folks are interested in that, I can make some of the new batch of
> Multiples panels into a 16-out panel. I'd just need to whip up a
> silkscreen for it. 14 bands... any ideas for the other two holes?
>
> word.
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Jul 24, 2008, at 1:43 PM, andrewlistmayer wrote:
>
> > Great! I'm so glad you have Yusynth PCB's now. I thought I was gonna
> > have to get my hands dirty ;)
> >
> > Can you put individual outs, or do you need additional buffers?
> >
> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > wrote:
> > >
> > > YuSynth Fixed Filter Bank PCBs in stock!
> > > They're huge! They need a 2-pot and a 3-pot bracket; the 4-pot is
> > > _just_ too short.
> > > http://www.bridechamber.com/bridechamber.com/Yu%20FFB%20PCB.html
> > >
> > > I also have all the parts for the component kits -- resistor
> > arrays, a
> > > lot of different cap values, etc.
> > > http://www.bridechamber.com/bridechamber.com/Yu%20FFB.html
> > >
> > > Scott Deyo
> > > The Bridechamber
> > > contact@
> > > http://www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com
> > >
> >
> >
> >
>