Thanks much for the clarification, Mark - but Jurgen did say this in
his note to us:
"The Tau needs two separate LEDs, I'm afraid. (Unless someone offers a
dual LED with 4 pins, i.e. sharing neither anode nor cathode.)"
So I guess a three lead dual-color LED won't work either according to
Jurgen. <shrug>
Bill and Will
--- In ModularSynthPanels@yahoogroups.com, Mark <yahoogroups@...> wrote:
>
> On 5/10/08, wjhall11 put forth:
> >As promised, about the Tau Pipe LED issue - Jurgen confirmed that you
> >really do need 2 LEDs
>
> Just not to confuse people, JH said on E-M that you can leave off one
> of the leds.
>
> >and that the bi-color one won't work (by now a foregone colclusion,
> >we know). Will wants to drill an extra LED hole so we can preserve
> >the original intent of Jurgen's design - so we'll do that above the
> >one that's already there and put a green one there.
>
> You could also use a three-wire two-color led. Mouser sells them for
> about thirty cents.
>